Spare Parts Inventory
Spare parts obsolescence management: see the notice before the breakdown does
A maker stops making a drive, a PLC or a contactor that three of your lines depend on. The notice arrives months ahead, in somebody’s inbox. Spare parts obsolescence management is how the plant sees it in time: knowing which parts are being discontinued and when, deciding which of them matter, and choosing a response while there are still options.
Two meanings of “obsolete”
In a storeroom, “obsolete” means two different things, and mixing them up costs money either way.
The first is a part its maker stops making. It may still be needed every month, and the parts on your shelf may be the last ones there will ever be. That is what this page is about.
The second is stock nobody needs any more: excess and obsolete stock, the parts nobody has drawn for years. That is capital to free, and the Spare Parts Inventory guide covers how to clear it safely.
The same word leads storerooms to scrap the wrong thing: the last spares of a discontinued part go out with the dead stock, and the stock that really is dead stays. Keep the two apart, starting with what you call them. For the second, see Dead Stock in Spare Parts: Sort It Before You Clear It.
The lifecycle and the dates that matter
Every part a maker sells moves through the same stages: active, phasing out, discontinued. Makers use their own words for them, such as “not recommended for new designs” (NRND), “active mature” or “end of life”, but the stages are the same.
Four dates decide how much time you have:
The announcement, when the maker tells its customers the part will go.
The last order date, the deadline for a last-time buy.
The last delivery, after which no new part arrives.
The end of spares and service, after which the maker repairs nothing either.
The dates come in product change and discontinuation notices, in the maker’s catalogue and from your supplier. Where nobody owns them, the notice lands in one inbox, and the plant learns about it when the part fails and the reorder bounces. See if a part is active, phasing out or obsolete, so you plan for obsolescence instead of reacting to it.
In Partium Cockpit, this is the Obsolescence Monitor:
Shows which parts are active, phasing out or obsolete.
Gives the date that matters, while there’s time to plan.
Read more: Lifecycle in the Workflow: NRND, PCNs and Last-Time Buys
Which discontinued parts matter
Not every notice is urgent. A discontinued part matters when three things come together: what happens when it is missing (a line stops, people are at risk, a replacement takes months), how long the stock on the shelf lasts at today’s consumption, and how many machines, at how many plants, still use it.
A part with two years of stock, on one machine due for replacement next year, can wait. A part with four on the shelf, in every line, with no successor named, cannot. Maintenance decides what is critical, part by part, and that decision outranks every other rule. The criticality your team sets outranks the model, so a spare the plant cannot run without is not flagged as stock to cut.
Read more: How to Find Obsolete Spare Parts Before a Failure Finds Them
Six responses to a discontinued part, from cheapest to biggest
-
Use what you hold
Look at every plant’s shelves first
Before anything is bought, find out how many you already have: in your own store, and at every sister plant. A part one plant still holds may cover another’s last years. One search shows where the part is stocked, at every plant, so you find it before you buy it again. Inventory Optimization in Cockpit:
Finds the plant that needs stock another plant holds.
Read more: Identifying Critical Spare Parts by What Happens When One Is Missing
-
Make a last-time buy
Size it from your own consumption
The maker’s last order date is a deadline, so this decision usually comes first. Size the buy from what the plant actually draws, through to the end of the machine’s planned life, not from a guess or the minimum order. Too large, and you hold a shelf of parts for a line that is retired early. Too small, and you are back at this list in three years with fewer options.
-
Qualify an approved alternate
A successor is often not a drop-in
A successor or an equivalent part from another maker can carry on where the old one stops. Check form, fit and function: firmware, dimensions, mounting, ratings, and any safety approval that has to be redone. Test it, and let maintenance or engineering sign it off before it goes on the shelf. Qualifying an alternate takes time, which is why it starts while the last-time buy still covers you.
Names potential alternatives for parts heading for obsolescence.
Read more: Form, Fit, Function: The Discipline Behind Approved Alternates
-
Find another source
Someone else may still make or stock it
The maker that stops is not always the only one. Another manufacturer may make the same part under its own number, a distributor may still hold stock, and surplus dealers trade in discontinued parts. Stock from surplus dealers can be used or unverified, so inspect it against the specification before it goes on the shelf. Supplier Discovery finds who else makes or sells the part, down to the OEM behind a dealer number.
Read more: Alternative Suppliers for OEM Spare Parts
-
Repair or refurbish
Put the failed unit back into stock
Where a repair shop can, a failed drive, valve or controller goes back on the shelf instead of in the bin. It buys time; it does not end the problem, because repairs need parts too, and those run out as well.
-
Retrofit
Replace the generation as a planned project
When a whole family is going, such as an old drive series or a PLC generation, the lasting answer is to replace it on the machines that use it. Plan it as a project, line by line, before the last spare is gone, not as an emergency after it.
Where to start: four steps
-
List the critical parts
on the lines that matter most.
-
Check their status and dates
with the maker or your supplier.
-
Write down a response for each part that is phasing out,
from the ladder above, and who owns it.
-
See it on a catalog.
Book a demo on our demo catalog or a sample of your own. Nothing to prepare.
While you plan for what is being discontinued, see what the stock nobody draws costs your plants: try it out for yourself in the ROI calculator.
One platform for the part, beside your ERP
Partium Cockpit is software for the teams who look after spare parts: maintenance and procurement. The dashboard shows what needs doing today, and the feature where you do it. For parts being discontinued, that is the Obsolescence Monitor.
Partium Agent runs beneath every feature of Cockpit and Find. You work in the product; Agent does the work underneath. Substitutions & OEM Insight flags the parts heading for obsolescence and names potential alternatives while there is still time to plan.
Your ERP stays the system of record. Partium Agent reads from it and writes back what your team decides. More on Spare Parts Inventory. You buy Partium Cockpit, Partium Find, or both. Partium Agent comes with either and is not sold on its own.
Questions about spare parts obsolescence management
What is spare parts obsolescence management?
Knowing which of your spare parts their makers are discontinuing and when, deciding which of them matter to the plant, and choosing a response for each in time: stock, a last-time buy, an alternate, another source, repair or a retrofit.
See if a part is active, phasing out or obsolete, so you plan for obsolescence instead of reacting to it.
What do NRND and a last-time buy mean?
NRND, “not recommended for new designs”, is a maker’s early warning: the part is still sold, but its end is coming. A last-time buy is the final order a maker accepts before it stops, up to its last order date.
Gives the date that matters, while there’s time to plan.
Is a successor part a drop-in replacement?
Often not. It can differ in firmware, dimensions, mounting or ratings, or need a safety approval again. Test it, and let maintenance or engineering sign it off before it goes on the shelf.
Names potential alternatives for parts heading for obsolescence.
Is a discontinued part the same as obsolete stock?
No. A discontinued part is one its maker stops making, and the plant may still need it. Obsolete stock is stock nobody draws any more. The first calls for a plan, the second for a clearance.
Shows which parts are active, phasing out or obsolete.
How many parts should a last-time buy cover?
As many as the plant will draw until the machine is due to be replaced, from its own consumption, less the stock other plants could spare. Count every plant first, so you do not buy what a sister plant already holds.
One search shows where the part is stocked, at every plant, so you find it before you buy it again.
See it on a catalog like yours
See it on our demo catalog, or on a sample of your own. There is nothing to prepare.